Search
Categories

Archive for the ‘Candle Making’ Category



PostHeaderIcon Making Votive Candles

Imagine the next time you join a discussion about Candle Making. When you start sharing the fascinating Candle Making facts below, your friends will be absolutely amazed.

Votive candles are simple, yet beautiful. These candles are often used to accent a center piece or design. Often it entails more than one votive candle, but not always. Votives are very cost effective because they burn for about fifteen hours. Votives must have a holder as they are not safe to use as a free standing candle.

Many individuals choose to use votive candles in their jack-o-lanterns at Halloween because they burn for a long time and illuminate the entire face of the jack-o-lantern. They are also one of the easiest types of candles to make. For beginners in the area of candle making votives provide a great learning experience to learn the basics of the candle making process.

To get started, you will need to gather your votive candle items. This includes wax, molds, a double boiler, and a thermometer. You will need to have wick and wick tabs for votive candles. The wick tabs serve as a base for the candle. You can choose to purchase dye and fragrance if you wish for your votive candles. To ensure your candles will form properly in the molds, consider investing in mold spray to keep them clean and lubricated.

You can see that there’s practical value in learning more about Candle Making. Can you think of ways to apply what’s been covered so far?

Once the wax has melted, add in any colors and fragrances. Immediately pour the melted wax into the molds, filling them to the lip of the mold. For easy clean up, place old newspaper under the wax molds before you pour the wax into them. You will need to save about 20% of the melted wax for the next pouring process.

While the wax is cooling in the molds, prepare your wicks. Attack a wick several inches longer than the mold to a wick tab. Dip the wicks into the hot wax. Keep an eye on the votive molds as they won’t take as long to cool as other types of candles. Once you can tell the wax is starting to harden, insert a wick with the tab into each mold through the bottom. As the wax continues to cool, it will meld to the metal tab, ensuring it stays in place at the base of the candle. As the candles cool, make sure your wick is staying in the center of the votive.

Once the wax has completely cooled, you will notice a sink hole in it due to shrinkage. You will want to pour melted wax into the molds again to remedy this. Make the wax about fifteen degrees hotter than the original wax you used to fill the votives. After the candles have completely cooled again, they will slide out of the molds easily. Trim the wick to about ½ an inch from the top of the candle. For safety, you will want to use a votive holder that is an inch or two taller than the candle itself.

Votive candles add class and charm to any home or special occasion. They are fun and simple to make. You can add any color or scent to your votive candles to add a personal touch to them. Votive candles burn for a long time, making them a worth while candle to use. They also make excellent gifts. To make the process even less expensive, look for votive candle holders at thrift shops and yard sales. You can further personalize your votive candles by applying pretty ribbon with a hot glue gun around the rim of the votive candle holder.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

PostHeaderIcon Prairie Candle Company

Current info about Candle Making is not always the easiest thing to locate. Fortunately, this report includes the latest Candle Making info available.

The Prairie Candle Company has been a family owned business in operation for ten years. Located in the rural community of Springfield, Colorado, these jar candles are known in the area for being pretty, colorful, wonderful smelling, and long lasting. Prairie Candle Company takes pride in offering customers the best quality candle products. They use only top of the line wax and supplies for optimum results.

Prairie Candle Company was developed out of a person’s love for candles. However, they were disappointed that most candles lost their smell quickly or they didn’t burn evenly. Since they enjoyed candles so much, research was conducted to develop a product that doesn’t smoke, it burns evenly, and it burns to the bottom of the jar. This is what we know as the Prairie candle today.

The classic collection of Prairie candles come in 5 sizes and 36 fragrances. Choose from 4.5 ounces, 10 ounces, 10.5 ounces, 16 ounces, or 26 ounces. The fragrances include some classics such as cinnamon and vanilla. There are some very original scents as well including cucumber melon and orange sherbet. Each Prairie candle in the classic collection comes with a glass lid. The colors of the candles are very pretty.

The all natural soy collection comes in 4 sizes and 24 great fragrances. These candles come in a glass jar with a wooden top. Choose from a small, medium, large, or extra large sugar pot. Flavors like cinnabun and cinnamon cider will make your mouth water.

For the cowboy types out there, you will simply enjoy the red neck collection. These candles come in tin cans that look similar to cans of shoe polish. These six ounce tins are available in 16 fragrances with names like Grizzly Breath which is cinnamon and Possum Porridge which is spring fever. You will have fun with these great candle names and the silly picture on each one.

If you don’t have accurate details regarding Candle Making, then you might make a bad choice on the subject. Don’t let that happen: keep reading.

Cup and pail candles by the Prairie candle company are very unique looking. There are seven fragrances to choose from including cherry vanilla. The cup and pail are white in color and very rustic looking. These are great for gift giving or home decorating.

The 14 layered jar candles will make your sweet tooth kick into gear! These candles are available in 16 ounce jars. The fragrances include orange sherbet and cream as well as pralines and cream. Your friends and family may be disappointed as they approach your home, thinking they are about to be offered a delicious homemade treat!

Pillar candles are available from the Prairie Candle Company line in 6 sizes and 6 fragrances. Cinfully vanilla sounds great! Choose from solid color pillars or multi colored ones. You really have to see pictures of these pillar candles to appreciate just how beautiful they are.

If you are interested in earning extra money, consider becoming a wholesaler for the Prairie Candle Company. You will be provided with special candle display shelves to allocate your space better. Contact the company for further information on the wholesale process.

The Prairie Candle Company offers many great candle options for your home or for you to give for gifts. You will enjoy the many colors, styles, and fragrances of this candle line. They use the best candle making processes and supplies to ensure all the candles you purchase will not only look great but burn for hours on end. You can purchase Prairie candles from various retailers or at their online store.

There’s no doubt that the topic of Candle Making can be fascinating. If you still have unanswered questions about Candle Making, you may find what you’re looking for in the next article.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

PostHeaderIcon Candle Making Additives

There are eight distinct candle making additives used in the candle making process. Some makers choose not to use them at all while others take advantage of what each type of additive has to offer to their candle making process. Candle wax additives are inexpensive and work well if you are educated in how to use them and why to use each kind.

Kemamide is a fine powder. It has a hint of ivory in the color, but it is close to being transparent. This type of additive becomes clumped if it is exposed to humidity so keep it in a closed, dry environment. Use this type of additive as a release agent. Add one teaspoon for each pound of wax.

Poly-AC is a fine powder, white in color. It has a dry texture and should also be stored in a dry environment to prevent clumping. This additive is a hardener. To be effective, add one teaspoon for each pound of wax.

Chimasorb 81 is a powder with a yellowish tint. Of all the additives, this one is the most likely to clump, even in areas of low humidity. Chimasorb 81 is used to enhance color. You do not need much of it, 1/10 of a percent for each pound of wax.

Stearic Powder is flaky. The color is white. This additive doesn’t react to humidity at all so it is an agreeable product to use for hardening. They amount you will use depends on the type of candles you are making. This additive helps reduce the temperature needed to melt the wax. Add about three teaspoons for each pound of wax. Be careful not to over use Stearic Powder as doing so will cause damage to the wax.

I trust that what you’ve read so far has been informative. The following section should go a long way toward clearing up any uncertainty that may remain.

103 Vybar generally is sold in the form of very small beads. The beads flow loosely and do not stick or clump together, even in areas of high humidity. 103 Vybar is a hardener as well. It will add a very creamy texture to your candle wax. This is a perfect hardener to use for scented candles. Add one teaspoon to for every pound of wax.

Paraflint is another hardener. It comes in beaded form similar to the 103 Vybar. However, the beads are much larger. You will want to use one teaspoon for every pound of wax.

Poly 400 comes in the form of beads that vary is size and shape. This is a UV inhibitor, which will keep your candles from fading in the sunlight. This additive is also to be used at the rate of one teaspoon for every pound of wax.

BHT Crystal is a yellowish powder. This is an antioxidant for wax that has been stored in liquid form for a length of time. Using this crystal will also add a very pretty luster to your wax.

Candle making additives can add a variety of features to your wax. The type of additives you choose to use will depend on the types of candles you are going to make as well as the climate in your region. Be careful to use candle making additives in the right amounts or you will cause damage to the wax, resulting in ill effects in the visual aspects of the candles as well as their ability to burn properly.

Now that wasn’t hard at all, was it? And you’ve earned a wealth of knowledge, just from taking some time to study an expert’s word on Candle Making.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

PostHeaderIcon Use Old Crayons to Make Candles

If you have children in your home, chances are you have an abundance of worn down crayons that don’t get used much anymore. Before throwing them out and buying new ones, consider using them to make candles. This can be a great way to turn them into something new and bright again. Most children will love the idea of creating candles with you and enjoy knowing their old crayons helped create them. Making candles out of crayons can also be a great gift giving idea.

Before you get started, discuss safety with your children. Since the crayons will have to be melted at a very high heat, they will not be able to participate in that portion of the candle making process. Assure them that there are many other aspects of the candle making that they can be a part of. To start, gather your supplies. In addition to the crayons, you will need a wax cartoon. This can be from milk, fabric softener, or orange juice. You will also need paraffin wax, two full ice cube trays, a double boiler, and white packing string. If you don’t want to use your double boiler an old coffee can and a saucepan will work just as well.

Trim the top off of the wax carton, leaving it approximately six inches high. You will want to cut the string at least 8 inches long. You will later cut the wick to fit the holder. To ensure a wick that burns easier take three pieces and bread them together. Use smaller pieces of string to tie the ends together. The holders for your candles can be anything you desire as long as they are non-flammable. Pretty vases, glasses, and jars work nicely.

If you don’t have accurate details regarding Candle Making, then you might make a bad choice on the subject. Don’t let that happen: keep reading.

Melt about three pounds of paraffin wax in the double boiler or coffee can. To help it melt faster, cut it into small chunks. The melting process with take about fifteen to twenty minutes. While the wax is melting, peel the papers off of the old crayons. You and your children can choose to separate the colors by lights and darks to have a mix that melds well or you can mix it all together and see what the color ends up being.

For best results, only add the crayons to the wax after it has completely melted. After the crayons and wax have both melted together, immediately remove the mixture from the stove and pour into your candle holders. If you would like to make scented candles try adding a splash of cinnamon or vanilla to your hot wax mixture.

It is important that the candles by left alone to completely harden. Make sure you have an area this can be done without disruption. It is also important to make sure small children can’t reach them, as out of curiosity they may want to check on their candles. The wax will stay hot for several hours and can scold the skin.

Making candles out of old crayons is a great way to spend the afternoon creating a neat project with your children. This process can also be done at schools and childcare centers with old crayons as presents for parents. Simply allow each child to decorate the outside of their candle holder while adults complete the rest of the process.

Is there really any information about Candle Making that is nonessential? We all see things from different angles, so something relatively insignificant to one may be crucial to another.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

PostHeaderIcon Make Pillar Candles

This article explains a few things about Candle Making, and if you’re interested, then this is worth reading, because you can never tell what you don’t know.

Pillar candles add a stylish touch of elegance to your home and even to your dinner table as part of a centerpiece. I have seen then used before on the tables at wedding receptions in the colors of the wedding. It was very appealing. Pillar candles come in all colors and scents. They are called pillars because they are round and tall like a pillar. There is no standard size though, as pillar candles come in many widths and heights. Occasionally, pillar candles are found with a unique design such as a ridge on the top and bottom.

Making pillar candles is quite simple. This type of candle is one of the most common for candle makers to indulge in. To make pillar candles, you will need molds. You can find them in all sizes at most craft stores. You can also get them online. Many online auction sites including Ebay and Yahoo offer several pillar candle molds for one great price. These molds can be found make of silicon, aluminum, or plastic. For best results, choose pillar candle molds that are made of aluminum. They allow the wax to cooler better, resulting in a smooth finish on the candles. They are also very durable.

To get started, decide on the size of candles you want to make and how many. There are charts in candle making books and on the internet that can help you determine how many pounds of candle wax you will need to complete your project. You will also need dye to color the candles and fragrances if you wish to add that to your candles.

It seems like new information is discovered about something every day. And the topic of Candle Making is no exception. Keep reading to get more fresh news about Candle Making.

You will need quality wick to make pillar candles. The wider the candle you will be making, the wider wick you want. To make this easier, simply purchase a standard type of wick. You can braid three pieces together to make a thicker wick for wider candles. Many of the pillar candle molds have a wick holder built. In simply slide a wick the diameter of the whole into it and eliminate the guess work. Make sure you dip the wick into the melted wax before attaching it to the candle mold. Keeping the wick in place can be tricky.

Once your candle wax is at the proper temperature, add in anything you want to be including in your candle including dye, scents, and additives. Immediately after, pour the hot wax into the pillar candle molds. Do not pour wax all the way to the top of the mold. You want to leave about four or five inches unfilled.

While for most candles you make, leave the candles to cool. Pillar candles need some further assistance during the cooling process. Once the top of the wax has started to become solid, you will need to add small relief holes to help with shrinkage. If you don’t create the relief holes your candles will get air pockets that keep them from hardening properly.

Pillar candles are beautiful. The simple design fits well with the décor in any room of your home. These candles make excellent gifts and center pieces. Pillar candles are easy to make and the supplies are inexpensive. This makes pillar candle making an excellent project, hobby, or money making project. Pillar candles burn for hours, ensuring you will get hours of enjoyment from your endeavors.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

PostHeaderIcon The Process of Candle Making

The more you understand about any subject, the more interesting it becomes. As you read this article you’ll find that the subject of Candle Making is certainly no exception.

Making candles is fun and relaxing. While it does give you the opportunity to be creative, there are some basic candle making steps you need to follow to make the process flow well. Nothing is more disappointing than discovering your candles didn’t form correctly. Safety is very important in candle making. Most people make candles in their own kitchen. You will want to have a fire extinguisher handy as well as a non slip mat placed in from of your stove. Always wear old clothing and long sleeves. However, make sure your sleeves don’t dangle where they can fall into the hot wax.

Since you will have to get the candle wax very hot to melt completely, there is the risk of severe burns. You also have the risk of starting a fire. It is important to clean up all spilled wax immediately. It won’t take long for it to harden, thus becoming very slippery. The dyes and scents used in candle making can leave stains.

The best way to set up your work area for candle making is to divide it into three specific work stations for preparation, the melting process, and the cooling process. The preparation area doesn’t need to be large, just a flat surface that is well organized. To make the process flow best, use a counter in close proximity to the stove. You will want to keep your utensils, thermometer, additives, and other candle making supplies in this area. It is a good idea to know what types of candles you will be making ahead of time so that you have all the necessary items ready to go.

If your Candle Making facts are out-of-date, how will that affect your actions and decisions? Make certain you don’t let important Candle Making information slip by you.

Your melting work station will likely be the stove. You will need to use a double boiler to melt the wax to a temperature that is hot enough without scorching it. The molecular structure of the wax can be damaged if the direct heat to it is too much. This means your candles won’t form well or hold up well when they are used. Wax comes in sheets or blocks. You will need to chip off chunks to melt. A hammer and flat head screwdriver work well for this.

Chipping wax should be done in the preparation stage so that you can simply add more pieces throughout the melting process. You will want to weigh each piece of wax before you add it to the pot for melting. This will help you determine how much scent and dye to add, which is based on weight.

The cooling station needs to be a flat area such as a countertop or table. The wax needs to cool for several hours so this area needs to be able to withstand high temperatures as well as remain undisturbed for long periods of time. The area should not be directly in the path of sunlight or heating/cooling systems. If it is, the candles will not set properly. If you plan to use molds for your candles, have them set up in the cooling area while the wax is melting. Once it is done melting, you will need to pour it immediately into the molds. To prevent a mess from spills, use an old cookie sheet for the molds to rest on.

The candle making process will run smooth and efficient if you follow these tips for establishing three work stations.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

PostHeaderIcon The Process of Candle Making

So what is Candle Making really all about? The following report includes some fascinating information about Candle Making–info you can use, not just the old stuff they used to tell you.

Making candles is fun and relaxing. While it does give you the opportunity to be creative, there are some basic candle making steps you need to follow to make the process flow well. Nothing is more disappointing than discovering your candles didn’t form correctly. Safety is very important in candle making. Most people make candles in their own kitchen. You will want to have a fire extinguisher handy as well as a non slip mat placed in from of your stove. Always wear old clothing and long sleeves. However, make sure your sleeves don’t dangle where they can fall into the hot wax.

Since you will have to get the candle wax very hot to melt completely, there is the risk of severe burns. You also have the risk of starting a fire. It is important to clean up all spilled wax immediately. It won’t take long for it to harden, thus becoming very slippery. The dyes and scents used in candle making can leave stains.

The best way to set up your work area for candle making is to divide it into three specific work stations for preparation, the melting process, and the cooling process. The preparation area doesn’t need to be large, just a flat surface that is well organized. To make the process flow best, use a counter in close proximity to the stove. You will want to keep your utensils, thermometer, additives, and other candle making supplies in this area. It is a good idea to know what types of candles you will be making ahead of time so that you have all the necessary items ready to go.

Now that we’ve covered those aspects of Candle Making, let’s turn to some of the other factors that need to be considered.

Your melting work station will likely be the stove. You will need to use a double boiler to melt the wax to a temperature that is hot enough without scorching it. The molecular structure of the wax can be damaged if the direct heat to it is too much. This means your candles won’t form well or hold up well when they are used. Wax comes in sheets or blocks. You will need to chip off chunks to melt. A hammer and flat head screwdriver work well for this.

Chipping wax should be done in the preparation stage so that you can simply add more pieces throughout the melting process. You will want to weigh each piece of wax before you add it to the pot for melting. This will help you determine how much scent and dye to add, which is based on weight.

The cooling station needs to be a flat area such as a countertop or table. The wax needs to cool for several hours so this area needs to be able to withstand high temperatures as well as remain undisturbed for long periods of time. The area should not be directly in the path of sunlight or heating/cooling systems. If it is, the candles will not set properly. If you plan to use molds for your candles, have them set up in the cooling area while the wax is melting. Once it is done melting, you will need to pour it immediately into the molds. To prevent a mess from spills, use an old cookie sheet for the molds to rest on.

The candle making process will run smooth and efficient if you follow these tips for establishing three work stations.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

PostHeaderIcon The History of Candle Making

The art of making candles has been around since primitive times. Of course, as time went by they become much different in design than what they were back then. In the early days, candles were a necessity for heat and light. Today they serve as decorations, wonderfully smelling mechanisms in our homes, and offer light for romantic dinners and baths.

The first known use of candles is not completely known. The remains of clay candle holders that date back to 4 BC have given us the knowledge that they have been in use for a very long time. Those clay candle holders were found in Egypt.

Candles were also used in ancient times in both China and Japan. These candles were made of wax extracted from insects and seeds. The taper candles of India were made from the wax extracted from boiled cinnamon. Candles are not known to exist in American until 1 AD. It is believed Native American’s burned oily fish and the back of the Cerio tree. When settlers came to New England, they used similar techniques to extract wax from bayberries. Many modern candle makers still use that process to make bayberry candles. However, it is quite expensive to do so.

Tallow was the product used to make candles in the 1600’s and 1700’s. This is a byproduct from animal fat. The product worked well but had a foul odor, especially when it was burning. Bees wax and paraffin wax both were introduced in the early 1800’s, and tallow stopped being used.

The dipping process for taper candles as we know it today began in 13 AD. Traveler merchants went door to door from town to town. While there, they made taper candles for individuals in their homes. Around 15 AD the idea to use molds for various types of candles was introduced in Paris. While this greatly improved the candle making process, there were still issues with getting the candles to burn properly.

How can you put a limit on learning more? The next section may contain that one little bit of wisdom that changes everything.

In the 1800’s, candle makers felt the wick was the weakest area of the candle as well as the cause for defective burning patterns. A braided wick was developed in 1825 that seemed to greatly improve the burning of several types of candles. By 1830, a process was in place to make candles using paraffin wax and molds. These candles were of good quality and burned well.

As gas and electricity were introduced, the candle making process continued to evolve. It became much easier and faster to melt the paraffin wax. It is believed that the reason so many of the elements of candle making stayed the same, including the hand dipping process is because the popularity of candles diminished with the introduction of electricity.

Today, candle making is a well known art form. There are many companies who manufacture wonderful candles with some very unique fragrances. There are also small businesses that still make their candles by home in their kitchen. Candle making is a great hobby and fun activity for the whole family to be involved in.

Candles are now used more for luxury and pleasure than for light or heat. The candle industry continues to grow with new types of candles being introduced all the time. The amount of colors, fragrances, and types of candles to choose from in the marketplace is absolutely amazing.

The art of making candles has definitely changed over time. If you are interested in trying your hand at it, choose a candle that is fairly easy to make such as the container candle or the votive.

Take time to consider the points presented above. What you learn may help you overcome your hesitation to take action.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

PostHeaderIcon Making Unity Candles

So what is Candle Making really all about? The following report includes some fascinating information about Candle Making–info you can use, not just the old stuff they used to tell you.

Unity candles are often a very important part of traditional wedding ceremonies. This candle is a symbol of the union both families. The ceremony involves the bride and groom each lighting a taper candle with a large column candle in the middle. Once they have lit their taper candles, the bride and groom light the column with the flames form the tapers.

It is very simple to make these beautiful candles. By making them, you can personalize the message the message on the column candle for those getting married. The message can be a poem, Biblical scripture, or even a photo of the couple getting married.

Making the taper candles is very simple. It involves the hand dipping process. You will dip the two wicks over and over again in the hot wax until the taper candles are the desired width. After they have completely cooled you can trim the wick to ¼ inch of the top of the candle.

To make the column candle you will need to use a candle mold. Simply heat the wax and pour it into the mold until it completely cools. Prior to pouring the wax into the mold you will need to insert the wick from the bottom of the mold. Cut the wick several inches longer so that you can tie it to a pencil or other object. This will keep the wick centered while the candle is cooling.

The information about Candle Making presented here will do one of two things: either it will reinforce what you know about Candle Making or it will teach you something new. Both are good outcomes.

After the column candle has cooled, you can place a poem, saying, photo, or even a wedding invitation to the candle using double stick tape or a glue gun. For a beautiful effect, consider cutting the attachment in an oval shape using the scissors that will leave a ridge all the way around the attachment.

To add beauty and appeal to the unity candles, you can make bows for them out of the wedding colors. For best results, use a piece of wire for each candle. Twist the wire in the front gently so you don’t damage the candles but enough to hold it securely in place. Don’t worry about the wire being seen as the beautiful bows will cover it up.

You will want to find some very pretty taper candle holders for these precious unity candles. Generally, the column candle will sit on a matching flat candle holder, similar to a small plate.

With the overall expense of a wedding, creating your own unity candles or allowing a friend or family member to do so as a gift will save you plenty. There are many great books available in craft stores and some bridal shops that provide step by step instructions for creating your own unity candles. The internet also offers great ideas and tips for making the process fun. Creating quality candles doesn’t have to be expensive or difficult.

The unity candle ceremony is an important part of many wedding ceremonies. You can provide the bride and groom with a wonderful trio of candles for their ceremony that they will treasure forever. The ability to add a personalized attachment to the column candle is a great incentive for making them yourself. Making additional column candles for the parents of the bride and groom or the wedding party is a great gift idea as well. You can place them in gift bags with bows that match the colors of the wedding.

Don’t limit yourself by refusing to learn the details about Candle Making. The more you know, the easier it will be to focus on what’s important.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

PostHeaderIcon Candle Making Supplies

If you have even a passing interest in the topic of Candle Making, then you should take a look at the following information. This enlightening article presents some of the latest news on the subject of Candle Making.

Candle Making is a fun hobby and enterprising business venture for others. There are basic supplies you need in order to make candles. All candles require three essentials – wax, wick, and a candle holder. Since candles can be made in various shapes, styles, and shapes; the amount of wax, length of wick, and type of candle holder you will use depends on your own preferences. The wax used for candle making is either paraffin wax or beeswax.

To melt the wax for your candles properly, you will need to purchase a good quality double boiler. To make the wax melting easy purchase stir sticks and a thermometer. To ensure the users of your candles can enjoy every bit, consider adding wick clips to the base of the candle.

Candle molds are very popular to help you design your own candles. You can purchase hundreds of different style candle molds or you can make your own. Candle molds are made from aluminum or metal. To make inserting the wick quick and easy, invest in a wick holder bar. A silicon mold release spray will ensure your candles slide out of the mold easily and keep their perfect shape. Mold cleaner will help ensure they work properly time and time again.

Colors add appeal to candles. The market offers a full array of colors to purchase for candles. There are many shades of the primary colors as well as pretty pastels and bold brights. Some candle makers like to experiment with mixing colors to create their own unique and attractive candle colors. The colors come in the form of a dye.

It’s really a good idea to probe a little deeper into the subject of Candle Making. What you learn may give you the confidence you need to venture into new areas.

You have the option of leaving candles plain or adding your favorite scents. Traditional scents include cinnamon, vanilla, and potpourri. However, the choices are unlimited. Some of the aromas help you to relax and others will make your mouth water. You don’t want your candle scents to be overpowering or not strong enough. To be sure you have the right about, add one ounce of scent for each pound of wax used to make the candle.

The amount of each supply you will need depends on the types of candles you are planning to make and the size of each. On average, you can get all the supplies you need to start making candles for $100. Candle making supplies can be purchased at craft stores or online. To save money on candle making supplies, consider purchasing a candle making kit. They offer a small supply of all the items for a discounted price.

Candle making is a fascinating art that allows you to express your own creations. To help ensure your candles develop in a form that can be used, purchase the above listed candle making supplies. There are many accessories available as well to make your candle making more enjoyable. Candle paints help you create your designs on the candles. This is a great way to create gorgeous contrasts between the candle color and the overall look.

Luster spray gives candles a very shiny look. A base leveler will help you align crooked candles. As well as ensure the bottoms are flat and smooth. Candles with wavy bottoms won’t sit well in a holder. Many people will enjoy the great books available on candle making. They can be purchased at major book retailers or online.

I hope that reading the above information was both enjoyable and educational for you. Your learning process should be ongoing–the more you understand about any subject, the more you will be able to share with others.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting